Two Part Flooring Adhesive
Compatible with floor heating High Performance Responsible Sourcing High Traffic Areas Resistant to water, oil & grease when cured 
| Product Introduction | A two-part adhesive specifically designed to secure a range of sheet floorcoverings to the Stopgap Isolator Membrane. Suitable for use in areas that are subject to high levels of moisture. When cured it is resistant to water, oil, and grease. |
| Packaging | The resin and hardener are supplied in the correct quantities for mixing without measuring. |
| Tub Quantity | 5kg Kit |
| Colour | Light beige when mixed |
| Consistency | Creamy |
| Coverage Rate (Approx.) | 3m² per kg using a 1.5mm x 5mm trowel or 2m² per kg using a 2mm x 6mm trowel |
| Pot Life | Up to 20 minutes depending on temperature, humidity and absorbency of the subfloor |
| Working Time | 1 hour at 20°C |
| Cure Time | At 20°C will allow foot traffic in 12 hours and normal use after 5 days. Avoid heavy point loads until the adhesive has fully cured – approximately 7 days |
With enhanced anti-bacterial formulation to easily remove bacteria from hands and tools
45.38 £
01509 267 413
info@charnwoodflooring.uk
Dolor amet sit justo amet elitr clita ipsum elitr est.
