Pressure Sensitive Vinyl Adhesive
Product Introduction | STYCCOBOND F49 HYBRID PS is a temperature-tolerant, water-based pressure sensitive adhesive that can be used for installing: Vinyl floorcoverings | Skirting | Coving and capping | PVC edgings | PVC-backed textile floor, and wall coverings. |
Suitability | It is designed for use in conservatories, areas where floor-to-ceiling windows are installed, and other areas where floorcoverings have to be tolerant of extreme temperature variations. It gives a strong initial tack and high bond strength. |
Benefits | The mixing of the two unique components maximises the high strength of the adhesive and makes it suitable for use in service conditions where temperatures can fluctuate between -20C and +60C in accordance with floorcovering manufacturers’ recommendations. It is protected against bio-degradation and is suitable for use over normal underfloor heating systems. |
Tub Quantity | 2kg Kit |
Colour | Base (White) | Activator (Red) | Mixed (Light Pink) |
Coverage Rate (Approx.) | Up to 6m2 per kg using a STYCCOBOND FINE NOTCH (A1) trowel |
Pot Life | Mixed, at 20°C - Up to 3 hours |
Open Time | Up to 4 hours depending on the temperature |
Drying Time | From 20 minutes depending on temperature, humidity and absorbency of the subfloor |
Warning | Do not apply loads or move furniture on the floorcovering until the adhesive has fully set. To maximise open time, we would recommend the provision of shading in areas such as conservatories to prevent direct sunlight causing excessive drying of the adhesive. |
a low odour, fast setting, fast drying, two component smoothing underlayment
25.72 £
With enhanced anti-bacterial formulation to easily remove bacteria from hands and tools
45.38 £
Weighted metal roller for the installation of vinyl safety floors
1131.93 £